标题：上海迪奥生物提供美国MIDMARK公司M9,M11全自动消毒柜
上海迪奥生物提供美国MIDMARK公司M9,M11全自动消毒柜.
http://www.dobio.com.cn/list.asp?ProdId=5953
6大特性:
1) 间断空气释放技术
这种蒸汽压力间断释放系统非常有效，因此可使用于复杂的消毒器械。消毒变得更加有效和可靠。
2) 简明辩识
LCD展示屏显示循环选择，温度和消毒时间。一旦循环消毒程序选定，温度压力以及剩余时间就会显示，剩余时间同样会在干燥程序显示
3) 干燥快速
一旦消毒完成，消毒门回自动打开，蒸汽静然释放，开始器械干燥，随时干燥待用。
4) 安全
如果消毒门没有关严或者循环水不足,LCD显示屏就回显示相关信息，一点显示，消毒桂就不工作，直到出错步骤被更改。
5) 排放或添加简便
当全自动消毒柜排放或者添加时，前端可见排放管和添加槽，而不是在设备上部或者后面。
6) 可选择安装打印机
MIDMARK公司M9/M11全自动消毒柜均可以提供永久温度和压力记录，可供打印。
M9 UltraClave Features: Pulse-air Removal Technology The M9's Steam-Flush Pressure-Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam autoclave systems, thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilization needs. Convenience at a Glance The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Note: Temperature & pressure are not displayed during dry mode. No More Wet Instruments Once the sterilization is complete, the door of the autoclave opens automatically and quietly to dissipate steam and dry your instruments. You'll have dry, sterile instruments every time. Safety Features If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization will not continue until you've attended to the unit. Ease of Draining & Filling For ease of draining and filling, the M9's reservoir fill port and drain tube are in the front of the unit, not on top or in back. Optional Printer Accessory The M9 printer accessory provides a permanent record of cycle times, temperatures and pressures during a cycle. Self Program Controls Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Exposure Time (3 to 90 minutes), Temperature (230 to 275?F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired. Pre-Programed Controls Four pre-programmed sterilization cycle controls: Unwrapped (132?C or 270?F for 3 minutes), Pouches (132?C or 270?F for 5 minutes), Packs (121?C or 250?F for 30 minutes), Handpieces (unwrapped and pouched) (132?C or 270?F for 6 minutes). LCD Display Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
6大特性:
1)间断空气释放技术
2)LCD展示屏简明辩识
3)干燥快速
4)安全:消毒门没有关严或者循环水不足,不工作
5)排放或添加简便
6)可选择安装打印机
M9 UltraClave Features: Pulse-air Removal Technology The M9's Steam-Flush Pressure-Pulse Air Removal System is so efficient that it can pass the air removal tests required on more complex vacuum steam autoclave systems, thus ensuring good steam penetration for those challenging loads. Plus, less complexity means better reliability and a cost effective solution for your sterilization needs. Convenience at a Glance The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode, the temperature, pressure, and the remaining cycle time is displayed. Remaining cycle time is also displayed in the dry mode. Note: Temperature & pressure are not displayed during dry mode. No More Wet Instruments Once the sterilization is complete, the door of the autoclave opens automatically and quietly to dissipate steam and dry your instruments. You'll have dry, sterile instruments every time. Safety Features If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization will not continue until you've attended to the unit. Ease of Draining & Filling For ease of draining and filling, the M9's reservoir fill port and drain tube are in the front of the unit, not on top or in back. Optional Printer Accessory The M9 printer accessory provides a permanent record of cycle times, temperatures and pressures during a cycle. Self Program Controls Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Exposure Time (3 to 90 minutes), Temperature (230 to 275?F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired. Pre-Programed Controls Four pre-programmed sterilization cycle controls: Unwrapped (132?C or 270?F for 3 minutes), Pouches (132?C or 270?F for 5 minutes), Packs (121?C or 250?F for 30 minutes), Handpieces (unwrapped and pouched) (132?C or 270?F for 6 minutes). LCD Display Indicates cycle selected, temperature and exposure time. During the cycle, the display shows messages describing status of cycle. When the cycle enters sterilization mode, remaining time is displayed as well as temperature and pressure.
上海迪奥生物科技有限公司
T:021-54659189
F:021-54659189
Email:webmaster@dobio.com.cn
WWW.DOBIO.COM.CN
WWW.DOBIO.NET